Going in…. 😃

Sooooo, this morning has been filled with disappointment however a shitload of learning for me! I had the boat ready to go into the water but was nervous about the through hole fittings I had installed! I jumped onto the boat while it was being lowered into the water to make sure I had zero leak. Starring at the new fittings and holding my breath…. and the trickling started. So back out we go!

I knew right away what the problem was and should have addressed it yesterday but didn’t!

I’ve now cut more threads off the fitting to be able to snug it tighter against the hull floor and use a full tube of sika flex! It’s dry fitted and now over-the-top-gooped! It will dry overnight and I will again hold my breath to see if it leaks…

Wish me luck!